TECHNICAL EFFICIENCY IN TRANSPORT MANUFACTURING FIRMS: EVIDENCE FROM MALAYSIA

Main Article Content

Mohd Fahmy-Abdullah
Rahmah Ismail
Noorasiah Sulaiman
Basri Abdul Talib

Abstract

This study aims to identify the level of technical efficiency and the determinants of technical inefficiency for transport manufacturing firms in Malaysia for 2010 using cross-sectional data of 130 firms acquired from the Department of Statistics (DOS). Based on the stochastic frontier analysis (SFA) approach, the results of the study reveal that the average level of technical efficiency is moderate. The estimated result identifies the important determinants of technical inefficiency which are due to employee wage rates as well as the cost of information and communication technology. The fundamental implications of this study are that transport manufacturing firms need to boost motivation among employees and strengthen the network of the production market via wage increment and communication cost.

Article Details

How to Cite
Mohd Fahmy-Abdullah, Rahmah Ismail, Noorasiah Sulaiman, & Basri Abdul Talib. (2017). TECHNICAL EFFICIENCY IN TRANSPORT MANUFACTURING FIRMS: EVIDENCE FROM MALAYSIA. Asian Academy of Management Journal, 22(1), 57–77. https://doi.org/10.21315/aamj2017.22.1.3
Section
Original Articles

References

Aigner, D., Lovell, C.K. & Schmidt, P. (1977). Formulation and estimation of stochastic frontier production function models. Journal of Econometrics, 6(1), 21–37. https://doi.org/10.1016/0304-4076(77)90052-5

Ajibefun, I.A. (2008). Technical efficiency analysis of micro-enterprises: Theoretical and methodological approach of the stochastic frontier production functions applied to Nigerian data. Journal of African Economies, 17(2), 161–206. https://doi.org/10.1093/jae/ejm009

Almeida, R., & Carneiro, P. (2009). The return to firm investments in human capital. Labour Economics, 16(1), 97–106. https://doi.org/10.1016/j.labeco.2008.06.002

Alvarez, R., & Crespi, G. (2003). Determinants of technical efficiency in small firms. Small Business Economics, 20(3), 233–244. https://doi.org/10.1023/A:1022804419183

Amdun P. Z (2007). Kajian mengenai perbezaan produktiviti antara syarikat asing dan syarikat tempatan dalam industri automotif di Malaysia. Master dissertation, Universiti Kebangsaan Malaysia, Malaysia.

Amornkitvikai, Y., Harvie, C., & Charoenrat, T. (2014). Estimating a technical inefficiency effects model for Thai manufacturing and exporting enterprises (SMEs): A stochastic frontier (SFA) and data envelopment analysis (DEA) approach. In Proceedings of Informing Science & IT Education Conference (InSITE) 2014, (pp. 363–390).

Andersson, B., Holmlund, B., & Lindh, T. (2002). Labor productivity, age and education in Swedish mining and manufacturing 1985–96. Unpublished paper, mimeo, Department of Economics, University of Uppsala, Sweden.

Arunsawadiwong, S. (2007). Productivity trends in the Thai manufacturing sector: The preand post-crisis evidence relating to the 1997 economic crisis. PhD dissertation, School of Economics and Finance, University of St.

Andrews, Scotland. Asid, R. (2010). The technical efficiency analyses of manufacturing sector in Malaysia: Evidence from the First Industrial Master Plan (1986–1995). Asian Social Science, 6(2), 99–107. https://doi.org/10.5539/ass.v6n2p99

Badunenko, O., Fritsch, M., & Stephan, A. (2008). What drives the productive efficiency of a firm? The importance of industry, location, R&D, and size. DIW Berlin Discussion Paper No. 775. https://doi.org/10.2139/ssrn.1118303

Barrett, A., & O'Connell, P. J. (2001). Does training generally work? The returns to incompany training. Industrial & Labor Relations Review, 54(3), 647–662. https://doi.org/10.1177/001979390105400307 & https://doi.org/10.2307/2695995

Batra, G., & Tan, H. (2003). SME technical efficiency and its correlates: Cross-national evidence and policy implications. World Bank Institute Working Paper, Washington, DC.

Battese, G.E., & Coelli, T.J. (1992). Frontier production functions, technical efficiency and panel data: With application to paddy farmers in India. Journal of Productivity Analysis, 3(1), 149–165. https://doi.org/10.1007/bf00158774

Battese, G.E., & Coelli, T.J. (1995). A model for technical inefficiency effects in a stochastic frontier production function for panel data. Empirical Economics, 20(2), 325– 332. https://doi.org/10.1007/BF01205442

Battese, G.E., & Corra, G.S. (1977). Estimation of a production frontier model: With application to the pastoral zone of Eastern Australia. Australian Journal of Agricultural Economics, 21(3), 169–179. https://doi.org/10.1111/j.1467-8489.1977.tb00204.x

Bertrand, J.M.A. (2013). Evolution of structural indicators: China and its regions 1981– 2010. Journal of Chinese Economic and Foreign Trade Studies 6(3), 100–118. https://doi.org/10.1108/JCEFTS-04-2013-0010

Charoenrat, T., Harvie, C., & Amornkitvikai, Y. (2013). Thai manufacturing small and medium sized enterprise technical efficiency: Evidence from firm-level industrial census data. Journal of Asian Economics, 27, 42–56. https://doi.org/10.1016/j.asieco.2013.04.011

Chavas, J.P., & Aliber, M. (1993). An analysis of economic efficiency in agriculture: A nonparametric approach. Journal of Agricultural and Resource Economics, 18(1), 1–16. https://doi.org/10.1016/S0169-5150(97)00030-3

Chowdhury, S.K. (2006). Investments in ICT?capital and economic performance of small and medium scale enterprises in East Africa. Journal of International Development, 18(4), 533–552. https://doi.org/10.1002/jid.1250

Chu, S.N., & Kalirajan, K. (2011). Impact of trade liberalisation on technical efficiency of Vietnamese manufacturing firms. Science, Technology & Society, 16(3), 265–284. https://doi.org/10.1177/097172181101600302

Coelli, T.J. (1996). A guide to FRONTIER version 4.1: A computer program for stochastic frontier production and cost function estimation. CEPA Working Paper, 96(07), 1–32.

Coelli, T.J., Rao, D.S.P., & Battese, G.E. (1998). An introduction to efficiency and productivity analysis. Boston: Kluwer Academic Publisher. https://doi.org/10.1007/978-1-4615-5493-6

Coelli, T.J., Rao, D.S.P., O'Donnell, C.J., & Battese, G. E. (2005). An introduction to efficiency and productivity analysis. New York: Springer Science & Business Media.

Cullinane, K., Wang, T.F., Song, D.W., & Ji, P. (2006). The technical efficiency of container ports: Comparing data envelopment analysis and stochastic frontier analysis. Transportation Research Part A: Policy and Practice, 40(4), 354–374. https://doi.org/10.1016/j.tra.2005.07.003

Debreu, G. (1951). The coefficient of resource utilization. Econometrica: Journal of the Econometric Society, 19(3), 273–292. https://doi.org/10.2307/1906814

Essmui, H., Madeline, B., Faridah, S., & Shamshubarida, R. (2013). Technical efficiency of manufacturing enterprises in Libya: A stochastic frontier analysis. International Journal of Management & Information Technology, 5(2), 528–535.

Farrell, M.J. (1957). The measurement of productive efficiency. Journal of the Royal Statistical Society. Series A (General), 120(3), 253–290. https://doi.org/10.2307/2343100

Giuri, P., Torrisi, S., & Zinovyeva, N. (2008). ICT, skills, and organizational change: Evidence from Italian manufacturing firms. Industrial and Corporate Change, 17(1), 29–64. https://doi.org/10.1093/icc/dtm038

Huang, T.L., Hallam, A., Orazem, P.F., & Paterno, E.M. (1998). Empirical tests of efficiency wage models. Economica, 65(257), 125–143. https://doi.org/10.1111/1468-0335.00117

Hempell, T. (2005). What's spurious, what's real? Measuring the productivity impacts of ICT at the firm-level. Empirical Economics, 30(2), 427–464. https://doi.org/10.1007/s00181-005-0248-6

Heshmati, A., & Yang, W.S. (2006). Contribution of ICT to the Chinese economic growth. Retrieved from https://core.ac.uk/download/pdf/7088842.pdf

Idiong, I.C. (2007). Estimation of farm level technical efficiency in smallscale swamp rice production in cross river state of Nigeria: A stochastic frontier approach. World Journal of Agricultural Sciences, 3(5), 653–658.

Idris, N.D.M., Siwar, C., & Talib, B. (2013). Determinants of technical efficiency on pineapple farming. American Journal of Applied Sciences, 10(4), 426–432. https://doi.org/10.3844/ajassp.2013.426.432

Inglada, V., Coto-Millan, P., & Rodriguez-Alvarez, A. (1999). Economic and technical efficiency in the world air industry. International Journal of Transport Economics / Rivista Internazionale di Economia dei Trasporti, 26(2), 219–236.

Ismail, R., & Tendot Abu Bakar, N. (2008). Analisis kecekapan teknikal firma Melayu dalam sektor pembuatan Malaysia. International Journal of Management Studies, 15(2), 143–163.

Ismail, R., & Jajri, I. (2008). Analisis perubahan kecekapan teknikal, perubahan teknologi, pertumbuhan produktiviti faktor keseluruhan dan pertumbuhan output dalam industri peralatan pengangkutan di Malaysia. Sains Humanika, 49(1), 31–48. https://doi.org/10.11113/jt.v49.208

Jacobs, B., Nahuis, R., & Tang, P. J. (2000). Human capital, R&D, productivity growth and assimilation of technologies in the Netherlands. In B. van Ark, S.K. Kuipers, & G.H. Kuper (Eds.), Productivity, technology and economic growth (pp. 293–315). New York: Springer. https://doi.org/10.1007/978-1-4757-3161-3_10

Jaafar, A.H., Mustapha, N.H.N., & Talib, B.A. (2004). Analisis kemajuan pembangunan dan tahap kecekapan penternakan akuakultur di Malaysia: Kajian kes. Paper presented at Seminar Kebangsaan Fakulti Ekonomi dan Perniagaan, Port Dickson, Negeri Sembilan.

Karunaratne, N.D. (2012). Macroeconomic reform and technical efficiency in Australian manufacturing: A stochastic production frontier analysis. Economia Internazionale / International Economics, 66(3), 345–369.

Khalifah, N.A. (2013). Ownership and technical efficiency in Malaysia's automotive industry: A stochastic frontier production function analysis. The Journal of International Trade & Economic Development, 22(4), 509–535. https://doi.org/10.1080/09638199.2011.571702

Kumbhakar, S., & Lovell, C.A.K. (2003). Stochastic frontier analysis. Cambridge: Cambridge University Press.

Lieberman, M.B., & Dhawan, R. (2005). Assessing the resource base of Japanese and US auto producers: A stochastic frontier production function approach. Management Science, 51(7), 1060–1075. https://doi.org/10.1287/mnsc.1050.0416

Liew, C.S., Zulridah, M.N., & Tee, B.A. (2012). Kesan ICT terhadap produktiviti pekerja dalam sektor perkhidmatan terpilih di Malaysia. Jurnal Ekonomi Malaysia, 46(2), 115–126.

Mahadevan, R., & Mansor. I. (2007). Competitiveness and workforce status in the Malaysian micro-electronics sector. Kuala Lumpur: Economics, East Asian Development Network (EADN).

Maudos, J., Pastor, J.M. & Serrano, L. (1999). Total factor productivity measurement and human capital in OECD countries. Economics Letters, 63(1), 39–44. https://doi.org/10.1016/S0165-1765(98)00252-3

Mazumder, R., & Adhikary, M. (2010). Measuring technical efficiency in the Indian automobile industry. South Asia Economic Journal, 11(1), 53–67. https://doi.org/10.1177/139156141001100104

Md Isa, R. (2005). Total factor productivity growth, efficiency and technological progress of the Malaysian manufacturing sector. PhD dissertation, Universiti Putra Malaysia, Malaysia.

Meeusen, W. & van den Broeck, J. (1977). Efficiency estimation from Cobb-Douglas production functions with composed error. International Economic Review, 18(2), 435–444. https://doi.org/10.2307/2525757

Meng, Q., & Li, M. (2002). New economy and ICT development in China. Information Economics and Policy, 14(2), 275–295. https://doi.org/10.1016/S0167-6245(01)00070-1

Minh, N.K., Long, G.T., & Thang, B.N. (2007). Technical efficiency of small and medium manufacturing firms in Vietnam: Parametric and non-parametric approaches. Korean Economic Review, 23(1), 187–221.

Mini, F., & Rodriguez, E. (2000). Technical efficiency indicators in a Philippine manufacturing sector. International Review of Applied Economics, 14(4), 461–473. https://doi.org/10.1080/02692170050150138

MITI (Ministry of International Trade and Industry). (2013). National automotive policy 2014. Kuala Lumpur: Ministry of International Trade and Industry.

MITI (Ministry of International Trade and Industry). (2014). MITI report. Kuala Lumpur: Ministry of International Trade and Industry.

Muhlau, P., & Lindenberg, S. (2003). Efficiency wages: Signals or incentives an empirical study of the relationship between wage and commitment. Journal of Management and Governance, 7(4), 385–400. https://doi.org/10.1023/A:1026261223790

Murthy, D.S., Sudha, M., Hegde, M.R., & Dakshinamoorthy, V. (2009). Technical efficiency and its determinants in tomato production in Karnataka, India: Data envelopment analysis (DEA) approach. Agricultural Economics Research Review, 22(2), 215–224.

Mustapha, N.H.N., & Talib, B.M. (2004). Technical efficiency and total factor growth in selected Malaysian manufacturing industries. In D. Padmini, B.T. Poo, & Mohd Nasir Mohd Saukani (Eds.), Proceeding Seminar Economic and Social Competitiveness Towards Strengthening Economic Development, 11–13 June 2004, Port Dickson, Malaysia.

Mustapha, N.H.N. (2011). Technical efficiency for rubber smallholders under RISDA's supervisory system using stochastic frontier analysis. Journal of Sustainability Science and Management, 6(1), 156–168.

Nelson, R.R., & Phelps, E.S. (1966). Investment in humans, technological diffusion, and economic growth. The American Economic Review, 56(1/2), 69–75.

Noor, Z.M., & Ismail, R. (2007). Analisis kecekapan teknik dalam industri skel kecil dan sederhana di Malaysia. International Journal of Management Studies, 14(1), 199–217.

Noor Aini, A.K., Basri, A.T., & Putri Z. A. (2008). Are foreign multinationals more efficient? A stochastic production frontier analysis of Malaysia's automobile industry. International Journal of Management Studies, 15, 91–113.

Oum, T.H., & Yu, C. (2012). Winning airlines: Productivity and cost competitiveness of the world's major airlines. New York: Springer Science & Business Media.

Perbadanan Produktiviti Malaysia. (2009/2010). Laporan produktiviti 2005 dan 2009. Kuala Lumpur: Perbadanan Produktiviti Malaysia.

Perbadanan Produktiviti Malaysia. (2013/2014). Laporan produktiviti 2013 dan 2014. Kuala Lumpur: Perbadanan Produktiviti Malaysia.

Petrakis, P.E., & Stamatakis, D. (2002). Growth and educational levels: A comparative analysis. Economics of Education Review, 21(5), 513–521. https://doi.org/10.1016/S0272-7757(01)00050-4

Petrin, A., White, T.K., & Reiter, J.P. (2011). The impact of plant-level resource reallocations and technical progress on US macroeconomic growth. Review of Economic Dynamics, 14(1), 3–26. https://doi.org/10.1016/j.red.2010.09.004

Pitt, M.M., & Lee, L.F. (1981). The measurement and sources of technical inefficiency in the Indonesian weaving industry. Journal of Development Economics, 9(1), 43–64. https://doi.org/10.1016/0304-3878(81)90004-3

Porcelli, F. (2009). Measurement of technical efficiency. A brief survey on parametric and non-parametric techniques (vol. 11, pp. 1–27). United Kingdon: University of Warwick.

Radam, A., Abu, M., & Abdullah, A.M. (2008). Technical efficiency of small and medium enterprise in Malaysia: A stochastic frontier production model. International Journal of Economics and Management, 2(2), 395–408.

Rosli, M., & Kari, F. (2008). Malaysia's national automotive policy and the performance of proton's foreign and local vendors. Asia Pacific Business Review, 14(1), 103–118. https://doi.org/10.1080/13602380701661044

Sanchez, P.C., & Villaroya, J.M. (2000). Efficiency, technical change and productivity in the European rail sector: A stochastic frontier approach. International Journal of Transport Economics / Rivista Internazionale di Economia dei Trasporti, 27(1), 55–76.

Sinani, E., Jones, D.C., & Mygind, N. (2008). Determinants of firm-level technical efficiency: Evidence using stochastic frontier approach. Corporate Ownership & Control, 5(3), 225–239. https://doi.org/10.22495/cocv5i3c1p7

Stevens, P.A., & Kneller, R. (2003). Absorptive capacity and frontier technology: Evidence from OECD manufacturing industries. Oxford Bulletin of Economics and Statistics, 68(8), 1–21.

Tingley, D., Pascoe, S., & Coglan, L. (2005). Factors affecting technical efficiency in fisheries: Stochastic production frontier versus data envelopment analysis approaches. Fisheries Research, 73(3), 363–376. https://doi.org/10.1016/j.fishres.2005.01.008

Tran, T.B., Grafton, R.Q., & Kompas, T. (2008). Firm efficiency in a transitional economy: Evidence from Vietnam. Asian Economic Journal, 22(1), 47–66. https://doi.org/10.1111/j.1467-8381.2008.00268.x

Vitaliano, D.F. (2002). An econometric assessment of the economic efficiency of State Departments of Transportation. International Journal of Transport Economics / Rivista Internazionale di Economia dei Trasporti, 29(2), 167–180.

Wadud, I.M. (2008). Productivity growth and efficiency change in Malaysian manufacturing: Recent evidence from disaggregated data. Empirical Economics Letters, 7(5), 497–504.

Wu, Y.R. (2008). Productivity, efficiency and economic growth in China. UK: Palgrave Macmillan Press. https://doi.org/10.1057/9780230228252

Yao, Y., & Zhang, Q. (2001). Analysis of technical efficiency in Chinese industry. Working Paper No. 200103, National Center for Economic Research, Tsinghua University, China. Zhang,

Y., Tang, Y., & Findlay, C. (2010). Productivity effects of services trade liberalization: Evidence from Chinese firm-level data. In International Conference on China and the Global Economy: Economic Integration and Protection, June 2010, Beijing