Construction Considerations for Low-Cost Earth Brick Shells

Main Article Content

Ryan Anthony Bradley
Mitchell Gohnert
Ivanka Bulovic

Abstract

Earthen shells are typically designed as pure-compression structures; however, some issues associated with construction practice, fixity, and certain actions (i.e., loading), which induce tensile stress, are often overlooked. Thus, cracking is not uncommon in unreinforced earthen shells. Cracking is particularly undesirable in these shells due to issues associated with the durability of earthen building materials. Moisture, in particular, may significantly compromise the strength and longevity of earthen masonry. In this paper, conventional and contemporary techniques utilised for the construction of earthen shells are reviewed. Furthermore, construction concerns with several methodologies are identified based on case study investigations and lessons learnt from several shells designed, built and monitored by the authors. An important finding is that fixity generated during construction with formwork can lead to significant cracking in earthen shells.

Article Details

How to Cite
Ryan Anthony Bradley, Mitchell Gohnert, and Ivanka Bulovic. 2026. “Construction Considerations for Low-Cost Earth Brick Shells”. Journal of Construction in Developing Countries 23 (1): 43–60. https://doi.org/10.21315/jcdc2018.23.1.3.
Section
Articles

References

Auroville Earth Institute (2016). Construction Projects. Tamil Nadu, India: Auroville Earth Institute. Available at: http://www.earth-auroville.com/construction_projects_en.php [Accessed on 27 October 2016].

Adam E.A. and Agib A.R.A. (2001). Compressed Stabilised Earth Block Manufacture in Sudan. Paris: United Nations Educational, Scientific and Cultural Organization (UNESCO).

Bradley, R.A., Gohnert, M., Bulovic, I., Goliger, A.M. and Surat, D.B. (2016). Steep catenary earth-brick shells as a low-cost housing solution. Journal of Architectural Engineering, 23(2): 04016018. https://doi.org/10.1061/(ASCE)AE.1943-5568.0000234.

British Standards Institution (2005). BS 5628:2005 Code of Practice for the Use of Masonry: Materials and Components, Design and Workmanship. London: British Standards Institution.

Bulovic, I. (2014). Catenary vaults: A solution to low-cost housing in South Africa. MSc diss. University of the Witwatersrand.

Chothia, A. (2010). An investigation into the thermal effects on a double groin vault. BSc project report. University of the Witwatersrand.

Fathy, H. (1973). Architecture for the Poor: An Experiment in Rural Egypt. Chicago: The University of Chicago Press. https://doi.org/10.7208/chicago/9780226239149.001.0001.

Fitchett, A. (2009a). Timbrel vaults from stabilized earth tile. Proceedings: 11th International Conference on Non-Conventional Materials and Technologies. Bath, UK: University of Bath.

Fitchett, A. (2009b). Skills development and employment creation through small public buildings in South Africa. PhD diss. University of the Witwatersrand.

Gohnert, M. and Magaia, S.J. (2004). Design and construction of an earth brick dome used for low-cost housing. Journal of South African Institute of Civil Engineering, 46(2): 9–14.

Gohnert, M. and Talocchino, G. (2011). Thin shell masonry domes for low-cost housing. Journal of the International Association for Shell and Spatial Structures, 52(1): 55–61.

Gohnert, M., Fitchett, A., Bulovic, I. and Bhikhoo, N. (2013). Structurally efficient housing incorporating natural forms. Journal of the South African Institution of Civil Engineering, 55(3): 96–102.

Houben, H. and Guillaud, H. (1994). Earth Construction: A Comprehensive Guide. London: Intermediate Technology Publications.

Huerta, S. (2003). The mechanics of timbrel vaults: A historical outline. In A. Becchi, M. Corradi, F. Foce and O. Pedemonte (eds.). Essays on the History of Mechanics. Basel, Switzerland: Birkhäuser, 89–134. https://doi.org/10.1007/978-3-0348-8091-6_5.

Joffroy, T. and Guillaud, H. (1994). The Basics of Building with Arches, Vaults and Cupolas. St Gallen, Switzerland: Swiss Center for Development Cooperation in Technology and Management.

Magaia, S. (2003). Domes in low-cost housing. MSc diss. University of the Witwatersrand.

Minke, G. (2009). Building with Earth: Design and Technology of a Sustainable Architecture. 2nd Ed. Basel, Switzerland: Birkhäuser. https://doi.org/10.1515/9783034612623.

Melaragno, M. (2012). An Introduction to Shell Structures: The Art and Science of Vaulting. New York: Springer US.

Morton, T. (2008). Earth Masonry: Design and Construction Guidelines. Berkshire: IHS BRE Press.

Ochsendorf, J. (2010). Guastavino Vaulting: The Art of Structural Tiling. New York: Princeton Architectural Press.

Pedreschi, R. (2000). The Engineer's Contribution to Contemporary Architecture: Eladio Dieste. London: Thomas Telford Ltd.

Ramage, M.H., Ochsendorf, J., Rich, P., Bellamy, J.K. and Block, P. (2010). Design and construction of the Mapungubwe National Park Interpretive Centre, South Africa. ATDF Journal, 7(1/2): 14–23.

Standards New Zealand (1998). NZS 4298 Materials and Workmanship for Earth Buildings. Wellington, New Zealand: Standards New Zealand.

Talocchino, G. (2005). Design and construction criteria for domes in low-cost housing. MSc diss. University of the Witwatersrand.

Tarragó, S. (2002). Guastavino Company (1885–1962): Catalogue of Works in Catalonia and America. Barcelona: Collegi d'Arquitectes de Catalunya.

The Adobe Alliance (2016). Homepage. Available at: www.adobealliance.org [Accessed on 27 January 2017].

Walker, P.J. (2004). Strength and erosion characteristics of earth blocks and earth block masonry. Journal of Materials in Civil Engineering, 16(5): 497–504. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:5(497).

Wilson, A. (2005). Practical Design of Concrete Shells. Texas: Monolithic Dome Institute.