Night Cooled Radiant Cooling Panel for Sustainable Building Cooling Mode in Malaysia
Main Article Content
Abstract
Night air temperature in Malaysia is generally about 23°C and is a potential source of heat sink to dissipate heat gain from a building. A thermal storage tank was used to store a certain quantity of water and was passively cooled during the night using the pitched roof as a heat exchanger to chill the water to as low as 22°C. The free cooling of water was then used as a cooling medium to cool the modular radiant cooling panel during the day time when the outdoor temperature exceeds 30°C. The experiment shows that the system was able to maintain an indoor temperature of less than 28°C when the outdoor temperature peaked to nearly 34°C while providing acceptable thermal comfort with certain controlled air movement. The use of the hydronic radiant cooling panel with free night cooled water as its coolant is proven to have significant energy saving potential of up to 85% while at the same time provide an acceptable room thermal comfort which meets the international standard criteria such as the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) Standard 55.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
American National Standards Institute (ANSI)/American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) (2013). Standard 55- 2013 Thermal Environmental Conditions for Human Occupancy. Atlanta: ASHRAE.
Baker, N.V. (1987). Passive and Low Energy Building Design for Tropical Island Climates. London: The Commonwealth Secretariat.
Bauman, F., Schiavon, S. and Feng, J. (2013). Cooling load calculations for radiant systems are they the same as traditional methods? ASHRAE Journal, 55(December): 20–27.
Chartered Institution of Building Services Engineers (CIBSE) (2004). Energy Efficiency in Buildings: CIBSE Guide. London: Chartered Institution of Building Services Engineers.
Crawley, B.D.B., Pedersen, C.O., Lawrie, L.K. and Winkelmann, F.C. (2000). EnergyPlus: Energy Simulation Program. ASHRAE Journal, 42(April): 49–56.
Crawley, D.B., Hand, J.W., Kummert, M. and Griffith, B.T. (2008). Contrasting the capabilities of building energy performance simulation programs. Building and Environment, 43(4): 661–673. https://doi.org/10.1016/j.buildenv.2006.10.027.
Djamila, H., Chu, C.M. and Kumaresan, S. (2013). Field study of thermal comfort in residential buildings in the equatorial hot-humid climate of Malaysia. Building and Environment, 62: 133–142. https://doi.org/10.1016/j.buildenv.2013.01.017.
Gregor, A. (2014). Bioclimatic Design. Washington DC: U.S. Green Building Council.
Hanif, M., Mahlia, T.M.I., Zare, A., Saksahdan, T.J. and Metselaar, H.S.C. (2014). Potential energy savings by radiative cooling system for a building in tropical climate. Renewable and Sustainable Energy Reviews, 32: 642–50. https://doi.org/10.1016/j.rser.2014.01.053.
Heidarinejad, G., Farmahini, M. and Delfani, S. (2010). Investigation of a hybrid system of nocturnal radiative cooling and direct evaporative cooling. Building and Environment, 45(6): 1521–1528. https://doi.org/10.1016/j.buildenv.2010.01.003.
Henninger, R.H. and Witte, M.J. (2015). EnergyPlus Testing with ASHRAE 1052-RP Toolkit: Building Fabric Analytical Tests. Washington DC: U.S. Department of Energy.
———. (2004). EnergyPlus Testing with ANSI/ASHRAE Standard 140-2001 (BESTEST). Washington DC: U.S. Department of Energy.
Hong, T., Buhl, W., Haves, P., Nouidui, T., Wetter, M., Vidanovic, S. and Roth, A. (2013). An Update on Energy Plus. Oak Ridge, TN: US Department of Energy.
Hussein, I., Rahman, M.H.A. and Maria, T. (2009). Field studies on thermal comfort of air-conditioned and non-air-conditioned buildings in Malaysia. Paper presented at the 3rd International Conference on Energy and Environment (ICEE 2009): Advancement towards Global Sustainability. Malacca, Malaysia, 7–8 December. https://doi.org/10.1109/ICEENVIRON.2009.5398622.
Hyde, R. (2008). Bioclimatic Housing: Innovative Design for Warm Climate. London: Earthscan.
Ibrahim, S.H. and Tinker, J.A. (2005). Improvements to thermal comfort in low-income housing in Malaysia. Paper presented at the Conference on Sustainable Building South East Asia. Kuala Lumpur, Malaysia, 11–13 April.
Imran, M.S., Baharun, A., Ibrahim, S.H. and Abidin, W.A.W.Z. (2016a). Evaluation of low cost radiant cooling panel in a test room with passively cooled water. Paper presented at the 2nd International Conference of Multidisciplinary Academic Research and Global Innovation. Beijing, China, 25–26 August.
———. (2016b). Nocturnal cooling of water as free cooling source for building indoor radiant cooling in Malaysian climate. Applied Mechanics and Materials, 833: 94–101. https://doi.org/10.4028/www.scientific.net/AMM.833.94.
———. (2016c). Renewable indoor radiant cooling and earth tube heat exchanger hybrid for thermal comfort improvement. Journal of Building Performance, 7(1): 56–71.
———. (2016d). Renewable night cooled chill water source for energy efficient indoor radiant cooling. International Journal of Engineering Research in Africa, 26: 86–98. https://doi.org/10.4028/www.scientific.net/JERA.26.86.
International Organization for Standardization (ISO) (2005). EN ISO 7730 Ergonomics of the Thermal Environment: Analytical Determination and Interpretation of Thermal Comfort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria. 3rd Ed. Geneva: ISO.
———. (1998). ISO 7726 Ergonomics of the Thermal Environment: Instruments for Measuring Physical Quantities. Geneva: ISO.
Kamar, H.M., Kamsah, N., Tap, M.M. and Salimin, K.A.M. (2012). Assessment of thermal comfort in a naturally ventilated residential terrace house. Proceedings: The 4th International Meeting of Advances in Thermofluids (IMAT 2011). Mellville, NY: AIP Publishing, 247–254. https://doi.org/10.1016/j.buildenv.2012.03.021.
Nguyen, A.T., Singh, M.K. and Reiter, S. (2012). An adaptive thermal comfort model for hot humid South-East Asia. Building and Environment, 56: 291–300. https://doi.org/10.1016/j.buildenv.2012.03.021.
Nielsen, L.S. (2012). Building integrated system design for sustainable heating and cooling. REHVA Journal, February: 24–27.
Normah, M.G., Lau, K.Y. and Mohd Yusoff, S. (2012). Thermal analysis of Malaysian double storey housing: Low/medium cost unit. Proceedings: The 4th International Meeting of Advances in Thermofluids (IMAT 2011). Mellville, NY: AIP Publishing, 513–520. Available at: http://scitation.aip.org/content/aip/proceeding/aipcp/10.1063/1.4704257 [Accessed on 30 January 2015].
Nugroho, A.M. (2011). A preliminary study of thermal environment in Malaysia's terraced houses. Journal of Economics and Engineering, 2(1): 25–29.
Rajeh, S. (1994). Wind Ventilation of Terrace Housing in Malaysia. Kuala Lumpur: ISIUTM International Convention and Exposition.
Roy, C. and Roger, G. (2008). Building Construction Handbook. 7th Ed. Burlington, NJ: Butterworth Heinemann.
Standard Malaysia (2007). MS 1525:2007 Code of Practice on Energy Efficiency and Use of Renewable Energy for Non Residential Building, Department of Standard Malaysia. 1st Ed. Kuala Lumpur: Department of Standards Malaysia.
Tyler, H., Stefano, S., Alberto, P., Dustin, M. and Kyle, S. (2013). CBE Thermal Comfort Tool. Berkeley, CA: Center for the Built Environment, University of California. Available at: http://cbe.berkeley.edu/comforttool/.
Uponor Inc. (2013). UPONOR Radiant Cooling Design Manual. 1st Ed. Apple Valley, MN: Uponor Inc.
Vangtook, P. and Chirarattananon, S. (2007). Application of radiant cooling as a passive cooling option in hot humid climate. Building and Environment, 42(2): 543–556. https://doi.org/10.1016/j.buildenv.2005.09.014.
———. (2006). An experimental investigation of application of radiant cooling in hot humid climate. Energy and Buildings, 38(4): 273–285.
Watson, R.D. and Chapman, K.S. (2002). Radiant Heating and Cooling Handbook. New York: McGraw-Hill.