Best Practices in Building Information Modelling Process Implementation in Green Building Design: Architects' Insights
Main Article Content
Abstract
An increasing number of clients are requesting green building design due to its potential to provide high-sustainability performance, monetary savings and health benefits to occupants. However, the practice of designing green building projects to meet overarching sustainability criteria is complex, with issues of poor information exchange synthesis. The building information modelling (BIM) process was created to ensure that the cumbersome green building data is exchanged accurately and in a coordinated manner. However, the implementation of the BIM process in green building design practices remains underexplored in the literature and industry practice. Therefore, this study aims to identify the best practices in BIM process implementation in the early stages of green building design. A quantitative research method was adopted; a questionnaire was used to survey 180 architects working in various construction firms in Malaysia. The questionnaire data was analysed using factor analysis to narrow down the long list of factors (best practices) into a small number of components. The results highlighted the best approaches in BIM process implementation in green building design practices: (1) Selection of a well-trained and competent design team, (2) Use of software with high interoperability to ensure exchange of accurate information, (3) Development of a standard method for BIM process implementation in green building design and (4) Timely identification of critical decision points. The research outcome will enlighten construction professionals on the best practices in implementing the BIM process in green building design, thereby allowing them to deliver building projects with highsustainability performance.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Al Hattab, M. (2021). The dynamic evolution of synergies between BIM and sustainability: A text mining and network theory approach. Journal of Building Engineering, 37: 102159. https://doi.org/10.1016/j.jobe.2021.102159.
Anaam, E.A., Abu Bakar, K.A., Mohd Satar, N.S. and Ma’arif, M.Y. (2020). Investigating the electronic customer relationship management success key factors in the telecommunication companies: A pilot study. Journal of Computational and Theoretical Nanoscience, 17(2–3): 1460–1463. https://doi.org/10.1166/jctn.2020.8825.
Atabay, S., Gurgun, A.P. and Koc, K. (2020). Incorporating BIM and green building in engineering education: Assessment of a school building for LEED certification. Practice Periodical on Structural Design and Construction, 25(4): 04020040.
Azis, S.S.A. (2021). Improving present-day energy savings among green building sector in Malaysia using benefit transfer approach: Cooling and lighting loads. Renewable and Sustainable Energy Reviews, 137: 110570. https://doi.org/10.1016/j.rser.2020.110570.
Barnes, P. and Davis, N. (2014). BIM in Principle and in Practice. London: ICE Publishing.
Bartlett, J.E., Kotrlik, J.W. and Higgins, C.C. (2001). Organizational research: Determining appropriate sample size in survey research. Information Technology, Learning and Performance Journal, 19: 43–50.
BSI (British Standard Institution) (2013). PAS 1192-2:2013 Incorporating Corrigendum No. 1: Specification for Information Management for the Capital/Delivery Phase of Construction Projects Using Building Information Modelling. London: BSI. Available at: http://www.bimireland.ie/wp-content/uploads/2015/08/BSI_PAS_1192_2_2013.pdf.
Chang, Y.T. and Hsieh, S.H. (2020). A review of Building Information Modeling research for green building design through building performance analysis. Journal of Information Technology in Construction, 25: 1–40. https://doi.org/10.36680/j.itcon.2020.001.
CIC (Computer Integrated Construction) (2010). BIM Execution Planning Guide. Pennsylvania: CIC. Available at: https://vdcscorecard.stanford.edu/sites/default/files/BIM_Project ExecutionPlanningGuide-v2.0.pdf.
CIDB (Construction Industry Development Board) (2016). Building Information Modelling Report: 2016. Kuala Lumpur: CIDB. Available at: http://www.cidb.gov.my/images/content/pdf/laporan-teknikal-pembinaan/BIM-Report-2016.pdf.
Cole, R. (2007). Building environmental assessment methods: Redefining intentions and roles. Building Research and Information, 33(5): 455–467. https://doi.org/10.1080/09613210500219063.
Construction Lifecycle (CLC) (2018). The various dimensions of BIM explained. Available at: https://www.constructionlifecycle.com/operationsmanagement/bim-dimensions.
Enegbuma, W. (2016). Factors affecting building information modelling adoption by Malaysian consultants and contractors. PhD diss. Universiti Teknologi Malaysia.
EPA (Environmental Protection Agency) (2016). Green building: Why build green? Available at: https://archive.epa.gov/greenbuilding/web/html/whybuild.html (Accessed on 28 February 2018).
Finch, W.H. (2020). Using fit statistic differences to determine the optimal number of factors to retain in exploratory factor analysis. Educational and Psychological Measurement, 80(2): 217–241. https://doi.org/10.1177/0013164419865769.
GhaffarianHoseini, A., Berardi, U. and Dahlan, N. (2014). What can we learn from Malay vernacular houses? Sustainable Cities and Society, 13: 157–170.
Hair, J.F., Black, W.C., Babin, B.J. and Anderson, R.E. (2014). Multivariate Data Analysis. 7th Ed. Upper Saddle River, NJ: Pearson Education Ltd.
Harlacher, J. (2016). An educator's guide to questionnaire development. Available at: http://ies.ed.gov/ncee/edlabs/projects/project.asp?projectID=4500.
Hussain, R., Pedro, A., Lee. D.Y., Pham, H.C. and Park, C.S. (2020). Impact of safety training and interventions on training-transfer: Targeting migrant construction workers. International Journal of Occupational Safety and Ergonomics, 26(2): 272–284. https://doi.org/10.1080/10803548.2018.1465671.
ISO (International Organization for Standardization) (2018). ISO 19650-1:2018 Organization and Digitization of Information About Buildings and Civil Engineering Works, Including Building Information Modelling (BIM) — Information Management Using Building Information Modelling — Part 1: Concepts and Principles. Geneva: ISO. Available at: https://www.iso.org/standard/68078.html [Accessed on 5 May 2019].
Lim, Y., Sediadi, E., Shahsavari, F. and Azli, N.F.M. (2016). Building information modelling for building energy efficiency evaluation: Integration with Green Building Index (GBI) in Malaysia. In 4th Annual International Conference on Architecture and Civil Engineering (ACE 2016). Singapore: GSTF 2016, 42–48. https://doi.org/10.5176/2301-394X_ACE16.56.
Lu, Y., Wu, Z., Chang, R. and Li, Y. (2017). A critical review and future directions. Automation in Construction, 83(August): 134–148. https://doi.org/10.1016/j.autcon.2017.08.024.
Munir, M., Kiviniemi, A., Jones, S. and Finnegan, S. (2020). BIM-based operational information requirements for asset owners. Architectural Engineering and Design Management, 16(2): 100–114. https://doi.org/10.1080/17452007.2019.1706439.
NBS (National Building Specification) (2019). BS EN ISO 19650-1:2018 Organization and Digitization of Information About Buildings and Civil Engineering Work. Newcastle upon Tyne: NBS. Available at: https://www.thenbs.com/PublicationIndex/documents/details?Pub=BSI&DocID=324869 [Accessed on 12 July 2011].
Ohueri, C., Enegbuma, W. and Habil, H. (2020). MyCREST embedded framework for enhancing the adoption of green office building development in Sarawak. Built Environment Project and Asset Management, 10(2): 215–230. https://doi.org/10.1108/BEPAM-10-2018-0127.
Ohueri, C.C., Enegbuma, W.I. and Kenley, R. (2018). Energy efficiency practices for Malaysian green office building occupants. Built Environment Project and Asset Management, 8(2): 134–146. https://doi.org/10.1108/BEPAM-10-2017-0091.
Ohueri, C.C., Enegbuma, W.I., Kuok, K.K., Wong, N.M., Ng, L.T. and Kenley, R. (2019). Preliminary evaluation of synergizing BIM and Malaysian carbon reduction and environmental sustainability tool. In P. Kaparaju, R. Howlett, J. Littlewood, C. Ekanyake and L. Vlacic (eds.), KES-SEB 2018: Sustainability in Energy and Buildings 2018. Smart Innovation, Systems and Technologies, Vol. 131. Cham, Switzerland: Springer, 218–227. https://doi.org/10.1007/978-3-030-04293-6_22.
Orsi, A., Guillén-Guillamón, I. and Pellicer, E. (2020). Optimization of green building design processes: Case studies within the European Union. Sustainability, 12: 1–16. https://doi.org/10.3390/su12062276.
Poirier, E.A., Staub-French, S. and Forgues, D. (2015). Assessing the performance of the building information modeling (BIM) implementation process within a small specialty contracting enterprise. Canadian Journal of Civil Engineering, 42(10): 766–778. https://doi.org/10.1139/cjce-2014-0484.
Proti?, S. (2021). Quantitative research in social trauma. In A. Hamburger, C. Hancheva and V.D. Volkan (eds.), Social Trauma: An Interdisciplinary Textbook. Cham, Switzerland: Springer, 327–334.
Ren, R. and Zhang, J. (2021). A new framework to address BIM interoperability in the AEC domain from technical and process dimensions. Advances in Civil Engineering, 2021: 8824613. https://doi.org/10.1155/2021/8824613.
Seghier, T.E., Ahmad, M.H. and Lim, Y. (2019). Automation of Concrete Usage Index (CUI) assessment using computational BIM. International Journal of Built Environment and Sustainability, 6(1): 23–30. https://doi.org/10.11113/ijbes.v6.n1.319.
Succar, B. (2009). Building information modelling framework: A research and delivery foundation for industry stakeholders. Automation in Construction, 18(3): 357– 375. http://dx.doi.org/10.1016/j.autcon.2008.10.003.
Waterhouse, R. and Philp, D. (2016). National BIM Report. Newcastle upon Tyne: National BIM Library.
Wu, W. and Issa, R.R. (2015). BIM execution planning in green building projects: LEED as a use case. Journal of Management in Engineering, 31(1): A4014007. https://doi.org/10.1061/(ASCE)ME.1943-5479.0000314.
Wu, Z., Shen, L., Yu, A.T. and Zhang, X. (2015). A comparative analysis of waste management requirements between five green building rating systems for new residential buildings. Journal of Cleaner Production, 112: 895–902. https://doi.org/10.1016/j.jclepro.2015.05.073.
Xue, K., Hossain, M., Liu, M., Ma, M., Zhang, Y., Hu, M., Chen, X. and Cao, G. (2021). BIM integrated LCA for promoting circular economy towards sustainable construction: An analytical review. Sustainability, 13(3): 1310. https://doi.org/10.3390/su13031310.
Zaid, M., Rad, A.K. and Zainon, N. (2017). Are green offices better than conventional? Measuring operational energy consumption and carbon impact of green office in Malaysia. Facilities, 35(11/12): 622–637. https://doi.org/10.1108/F-06-2016-0063.
Zanni, M.A. (2016). Communication of sustainability information and assessment within BIM-enabled collaborative environment. PhD diss. Loughborough University.
Zanni, M.A., Soetanto, R. and Ruikar, K. (2017) Towards a BIM-enabled sustainable building design process: Roles, responsibilities and requirements. Architectural Engineering and Design Management, 13(2): 101–129. https://doi.org/10.1080/17452007.2016.1213153.