Assessing the Level of Resilience in Construction Safety Management Systems in the Ghanaian Construction Industry
Main Article Content
Abstract
The traditional safety management approach is a control-oriented approach that seeks to direct and control workers to complete the expected company safety standards and regulations. This approach to safety management is partially compatible with the growing complexity of contemporary organisations. Therefore, a more comprehensive and modern approach to safety management is necessary, hence, the resilience management system. This study is part of a PhD programme. The study’s objective was to establish the level of resilience capabilities of construction safety management systems (SMSs) in Ghana’s construction industry. The targeted respondents were health and safety (HS) managers, managing directors, project managers, site engineers and construction managers of D1K1, D2K2, D3K3 and D4K4 construction companies. The list of 144 construction companies surveyed in this study was obtained from the Association of Building and Civil Engineering Contractors Ghana and deemed to be in good standing. The study used purposive sampling techniques to reach out to the respondents. Descriptive statistics, a one-sample t-test, a one-way analysis of variance (ANOVA) and its post hoc test and the resilience analysis grid (RAG) were employed. The results revealed that out of the seven SMSs assessed, only “policy” measured up to the acceptable level of resilience, thus establishing that the entire safety management system (SMS) is not resilient. These findings have empirically established that SMSs in the Ghanaian construction industry are not resilient. The results further highlight the necessity for contractors and stakeholders to switch from a conventional safety management strategy to a more proactive safety management approach and to establish a customised method to a more robust safety management system.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Abubakar, M., Zailani, B.M., Abdullahi, M. and Auwal, A.M. (2021). Potential of adopting a resilient safety culture towards improving the safety performance of construction organisations in Nigeria. Journal of Engineering, Design and Technology, 20(5): 1236–1256. https://doi.org/10.1108/JEDT-09-2020-0354
Aidoo, I., Fugar, F., Adinyira, E. and Ansah, N.B. (2022). Understanding the concept of resilience in construction safety management systems. In C. Gorse, L. Scott, C. Booth and M. Dastbaz (eds.), Climate Emergency: Managing, Building and Delivering the Sustainable Development Goals. Cham, Switzerland: Springer, 217–233.
Annan, J.S., Addai, E.K. and Tulashie, S.K. (2015). A call for action to improve occupational health and safety in Ghana and a critical look at the existing legal requirement and legislation. Safety and Health at Work, 6(2): 146–150. https://doi.org/10.1016/j.shaw.2014.12.002
Asah-Kissiedu, M.I.L.L.I.C.E.N.T. (2019). Development of an integrated safety, health and environmental management capability maturity model (SHEMCMM) for Ghanaian construction companies. PhD diss. University of the West of England.
Asiamah, N., Mensah, H.K. and Danquah, E. (2018). An assessment of the emotional intelligence of health workers: A scale validation approach. Journal of Global Responsibility, 9(2): 141–159. https://doi.org/10.1108/JGR-03-2017-0014
Bešinović, N. (2020). Resilience in railway transport systems: A literature review and research agenda. Transport Reviews, 40(4): 457–478. https://doi.org/10.1080/01441647.2020.1728419
Bugalia, N., Maemura, Y. and Ozawa, K. (2020). Organizational and institutional factors affecting high-speed rail safety in Japan. Safety Science, 128: 1–17. https://doi.org/10.1016/j.ssci.2020.104762
Buniya, M.K., Othman, I., Sunindijo, R.Y., Kineber, A.F., Mussi, E. and Ahmad, H. (2021). Barriers to safety program implementation in the construction industry. Ain Shams Engineering Journal, 12(1): 65–72. https://doi.org/10.1016/j.asej.2020.08.002
Caldera-Sánchez, A., De Serres, A., Gori, F., Hermansen, M. and Röhn, O. (2016). Strengthening economic resilience: Insights from the post-1970 record of severe recessions and financial crises. OECD economic policy papers, no. 20. https://doi.org/10.1787/6b748a4b-en
Camiré, M., Turgeon, S., Kramers, S., Rathwell, S., Bean, C., Sabourin, C. and Pierce, S. (2021). Development and initial validation of the coaching life skills in sport questionnaire. Psychology of Sport and Exercise, 53: 1–50. https://doi. org/10.1016/j.psychsport.2020.101845
Cuppen, E., Bosch-Rekveldt, M.G., Pikaar, E. and Mehos, D.C. (2016). Stakeholder engagement in large-scale energy infrastructure projects: Revealing perspectives using Q methodology. International Journal of Project Management, 34(7): 1347–1359. https://doi.org/10.1016/j. ijproman.2016.01.003
Dethlefsen, R., Orlik, L., Müller, M., Exadaktylos, A.K., Scholz, S.M., Klukowska-Rötzler, J. and Ziaka, M. (2022). Work-related injuries among insured construction workers presenting to a Swiss adult emergency department: A retrospective study (2016–2020). International Journal of Environmental Research and Public Health, 19(18): 1–16. https://doi.org/10.3390/ijerph191811294
Eiris, R., Gheisari, M. and Esmaeili, B. (2018). PARS: Using augmented 360-degree panoramas of reality for construction safety training. International Journal of Environmental Research and Public Health, 15(11): 1–21. https://doi.org/10.3390/ijerph15112452
Feng, Y. and Trinh, M.T. (2019). Developing resilient safety culture for construction projects. Journal of Construction Engineering and Management, 145(11): 04019069. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001720
Gavalas, V.S. (2022). Demographic regimes and insular populations: the case of the Ionian islands. Journal of Regional Socio-Economic Issues, 12(3): 22–41.
Griffioen, J., Drift, M.V.D. and Broek, H.V.D. (2021). Enhancing maritime crew resource management training by applying resilience engineering: A case study of the bachelor maritime officer training programme in Rotterdam. Education Sciences, 11(8): 1–19. https://doi.org/10.3390/educsci11080378
Hair, Jr, J.F., Howard, M.C. and Nitzl, C. (2020). Assessing measurement model quality in PLS-SEM using confirmatory composite analysis. Journal of Business Research, 109: 101–110. https://doi.org/10.1016/j.jbusres.2019.11.069
Hochstein, S., Pavlovskaya, M., Bonneh, Y.S. and Soroker, N. (2018). Comparing set summary statistics and outlier pop out in vision. Journal of Vision, 18(13): 1–13. https://doi.org/10.1167/18.13.12
Holling, C.S. (1973). Description of the Predation Model: Predator-Prey Functional Response. IIASA research memorandum, RM-73-001. Laxenburg, Austria: International Institute for Applied Systems Analysis (IIASA).
Hollnagel, E. (2021). The changing nature of task analysis. In G. Salvendy and W. Karwowski (eds.), Handbook of Human Factors and Ergonomics. Hoboken, NJ: John Wiley & Sons Inc., 358–367.
. (2014). Safety-I and Safety-II: The Past and Future of Safety Management. London: CRC Press. https://doi.org/10.1201/9781315607511
. (2011). Epilogue: RAG – The resilience analysis grid. In J. Pariès and J. Wreathall (eds.), Resilience Engineering in Practice. London: CRC Press, 275–296.
. (2010). How resilient is your organisation. An introduction to the Resilience Analysis Grid (RAG). Paper presented at the Sustainable Transformation: Building a Resilient Organisation. Toronto, Canada, May. Available at: https://minesparis-psl.hal.science/hal-00613986/document
Hollnagel, E. and Nemeth, C.P., eds. (2022). From resilience engineering to resilient performance. In Advancing Resilient Performance. Cham: Springer, 1–9.
HSE (Health Service Executive) (2020). Incident management framework. Available at: https://www.hse.ie/eng/about/qavd/incident-management/hse-2020-incident-management-framework-guidance.pdf [Accessed 3 November 2022].
. (2013). INDG 275: Plan, do, check, act; An introduction to managing for health and safety. Available at: https://books.hse.gov.uk/gempdf/indg275.pdf
International Labour Organization (2017). Safety and health at work. Available at: http://www.ilo.org/global/topics/safety-and-health-at-work/lang--en/index. htm
Kalkbrenner, M.T. (2021). Alpha, Omega and H internal consistency reliability estimates: Reviewing these options and when to use them. Counseling Outcome Research and Evaluation, 14(1): 77–88. https://doi.org/10.1080/21501378.2021.1940118
Konaka, S. and Little, P.D. (2021). Introduction: Rethinking resilience in the context of East African pastoralism. Nomadic Peoples, 25(2): 165–180. https://doi.org/10.3197/np.2021.250201
Kontogiannis, T., Leva, M.C. and Balfe, N. (2016). Total safety management: Principles, processes and methods. Safety Science, 100: 128–142. https://doi.org/10.1016/j.ssci.2016.09.015
Kwofie, T.E. (2015). Contribution of unique features of mass housing projects to project team communication performance. PhD diss. Kwame Nkrumah University of Science and Technology.
Mafabi, S. and Kabagambe, F.C. (2021). Nurturing organisational resilience through knowledge management: A qualitative inquiry of parastatals. Continuity and Resilience Review, 3(3): 265–281. https://doi.org/10.1108/CRR-06-2021-0024
Maliha, M.N., Aisheh, Y.I.A., Tayeh, B.A. and Almalki, A. (2021). Safety barriers identification, classification and ways to improve safety performance in the architecture, engineering and construction (AEC) industry: Review study. Sustainability, 13(6): 1–24. https://doi.org/10.3390/su13063316
Mohammadi, A., Tavakolan, M. and Khosravi, Y. (2018). Factors influencing safety performance on construction projects: A review. Safety Science, 109: 382–397. https://doi.org/10.1016/j.ssci.2018.06.017
Mondal, S., Saha, S., Mondal, H., De, R., Majumder, R. and Saha, K. (2022). How to conduct inferential statistics online: A brief hands-on guide for biomedical researchers. Indian Journal of Vascular and Endovascular Surgery, 9(1): 12–9. https://doi.org/10.4103/ijves.ijves_116_21
Mullins-Jaime, C., Case, S. and Wachter, J.K. (2021). An integrated approach for understanding, correcting and preventing unsafe acts. Professional Safety, 66(2): 20–27.
Mustapha, Z., Aigbavboa, C. and Thwala, W. (2018). Examination of occupational health and safety practices in Ghana. In P. Arezes (ed.), Advances in Safety Management and Human Factors: Proceedings of the AHFE 2017 International Conference on Safety Management and Human Factors, July 17–21, 2017, The Westin Bonaventure Hotel, Los Angeles, California, USA. Cham, Switzerland: Springer International Publishing, 403–409.
. (2015). Examination of safety performance regulations in the Ghanaian building construction industry. In I. Musonda, J. Agumba and C. Okoro (eds.), Proceedings of the DII-2015 Conference on Infrastructure Development and Investment Strategies in Africa. Johannesburg, South Africa: University of Johannesburg, 174–178.
Okonkwo, P.N. and Wium, J. (2020). Health and safety management systems within construction contractor organizations: Case study of South Africa. Journal of Construction Engineering and Management, 146(5): 05020003. https://doi. org/10.1061/(asce)co.1943-7862.0001833
Osei-Asibey, D., Ayarkwa, J., Acheampong, A., Adinyira, E. and Amoah, P. (2021). Impacts of accidents and hazards on the Ghanaian construction industry. International Journal of Construction Management, 23(4): 7082–717. https://doi.org/10.1080/15623599.2021.1920161.
Pardo-Ferreira, M.C., Rubio-Romero, J.C. and Martínez-Rojas, M. (2018). Applying resilience engineering to improve safety management in a construction site: Design and validation of a questionnaire. World Academy of Science, Engineering and Technology International Journal of Industrial and Manufacturing Engineering, 12(9): 1–6. https://doi.org/10.5281/zenodo.1474691
Patriarca, R., Gravio, G.D., Costantino, F., Falegnami, A. and Bilotta, F. (2018). An analytic framework to assess organisational resilience. Safety and Health at Work, 9(3): 265–276. https://doi.org/10.1016/j.shaw.2017.10.005
Pęciłło, M. (2016). The resilience engineering concept in enterprises with and without occupational safety and health management systems. Safety Science, 82: 190–198. https://doi.org/10.1016/j.ssci.2015.09.017
Petersen, D. (1998). Safety policy, leadership and culture. In J. Saari (ed.), Safety Policy and Leadership, ILO Encyclopedia of Occupational Health and Safety. 4th Ed. Vol. 2. Geneva: International Labour Organization, 59.2–59.7.
Pillay, M. (2016). Improving organizational health and safety performance: Theoretical framework and contemporary approaches. International Journal of Management Excellence, 7(3): 855–866.
Robertson, T., Docherty, P., Millar, F., Ruck, A. and Engstrom, S. (2021). Theory and practice of building community resilience to extreme events. International Journal of Disaster Risk Reduction, 59: 1–7. https://doi.org/10.1016/j. ijdrr.2021.102253
Rutting, L., Vervoort, J., Mees, H. and Driessen, P. (2022). Strengthening foresight for governance of social-ecological systems: An interdisciplinary perspective. Futures, 141: 102988. https://doi.org/10.1016/j.futures.2022.102988 Sayed, M. (2016). Safety and resilience engineering in Saudi Arabian industries. PhD diss. University of Sussex.
Seno, L.I. (2022). An exploration of governance and management in high performing private training establishments in New Zealand. MBS diss. Massey University.
Shafie, A.S., Rubani, S.N.K. and Paimin, A.N. (2021). Safety management practices in the Malaysia technical and vocational education training (TVET). European Journal of Molecular and Clinical Medicine, 8(2): 1463–1470.
Shanthi, R. (2019). Multivariate Data Analysis: Using SPSS and AMOS. Chennai/New Delhi/Tirunelveli: MJP Publisher.
Shi, Z., Watanabe, S., Ogawa, K. and Kubo, H. (2018). 2-Reviews of resilience theories and mathematical generalization. Structural Resilience in Sewer Reconstruction, 17–78. https://doi.org/10.1016/B978-0-12-811552-7.00002-X
Southwick, S.M., Pietrzak, R.H., Tsai, J., Krystal, J.H. and Charney, D. (2015). Resilience: An update. PTSD research Quarterly, 25(4): 1–10.
Stolzer, A.J., Friend, M.A., Truong, D., Tuccio, W.A. and Aguiar, M. (2018). Measuring and evaluating safety management system effectiveness using Data Envelopment Analysis. Safety Science, 104: 55–69. https://doi.org/10.1016/j.ssci.2017.12.037
Tear, M., Curtis, J., Waddell, A., Lennox, A., Grundy, E.A.C. and Bragge, P. (2022). Safety culture behaviours in construction: A rapid evidence and practice review. OSF Preprints, 1–31. https://doi.org/10.31219/osf.io/vr8g2
Vanderhaegen, F. (2015). Erik Hollnagel: Safety-I and Safety-II, the past and future of safety management. Safety Hygiene News, 17: 461–464. https://doi.org/10.1007/s10111-015-0345-z
Vulink, M. (2004). Technology transfer in the construction industry of Ghana: Human resource development through international collaboration between foreign and local contractors in the Greater Accra Region. MSc diss. Technische Universiteit Eindhoven.
Werner, E.E. and Smith, R.S. (2019). Overcoming the Odds: High Risk Children from Birth to Adulthood. Thaca, NY: Cornell University Press.