Applications and Challenges of Adopting the Internet of Things (IoT) in the Rwandan Construction Industry
Main Article Content
Abstract
The adoption of the Internet of Things (IoT) is essential because it facilitates project information, saves time and cost and reduces risks on construction sites. The objectives of the study were to investigate the adoption, application and challenges of IoT technologies in the Rwandan construction industry. The survey research design (open- and close-ended questionnaire) was adopted for the study. The questionnaire was administered to registered construction professionals in Rwanda. The stratified random sampling technique was adopted for the study. The data for the study was analysed using frequencies, mean scores and student t-tests. The findings of the study indicated that none of the IoT technologies was well-adopted, two were adopted, eleven were averagely adopted and twenty-two were slightly adopted. Also, IoT technologies were used for project management, efficient transportation, time management and production of site plans. The significant challenges with the adoption of IoT technologies were a lack of training centres, lack of IoT awareness, lack of expertise, poor network connectivity, a requirement for extra budget to acquire IoT technologies and poor collaboration among construction stakeholders. The study concluded that the level of adoption of IoT technologies in the Rwandan construction industry was low and there was no difference in the opinions of the respondents on the adoption and challenges of adopting IoT technologies in the construction industry. The study recommends the spread of awareness of the adoption of IoT technologies and enact laws and policies that can foster the adoption of IoT technologies in the construction industry.
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Arslan, V., Ulubeyli, S. and Kazaz, A. (2019). The use of the Internet of Things in the construction industry. Paper presented at the Fourth International Energy and Engineering Congress. Gaziantep University, Turkey, 24–25 October.
Bamgbade, J.A., Nawi, M.N. and Kamarudeen, A.M. (2016). Construction firms’ sustainability compliance level. Journal of Engineering, Science and Technology, 126–136.
Bamurigire, P., Vodacek, A., Valko, A. and Ngoga, S.R. (2020). Simulation of Internet of Things water management for efficient rice irrigation in Rwanda. Agriculture, 10: 431–443. https://doi.org/10.3390/agriculture10100431
Berk, N. and Bicen, S. (2016). Causality between the construction sector and GDP growth in emerging countries: The case of Turkey. Athens Journal of Mediterranean Studies, 4(1): 19–36. https://doi.org/10.30958/ajms
Bird, D.K. (2009). The use of questionnaires for acquiring information on public perception of natural hazards and risk mitigation: A review of current knowledge and practice. National Hazards and Earth System Sciences, 9: 1307–1325.
Brous, P., Janssen, M. and Herder, P. (2019). The dual effects of the Internet of Things (IoT): A systematic review of the benefits and risks of IoT adoption by organizations. International Journal of Information Management, 51(2): 1–33. https://doi.org/10.1016/j.ijinfomgt.2019.05.008
Chen, J.H., Ha, N.T.T., Tai, H.W. and Chang, C.A. (2020). The willingness to adopt the internet of things (IoT) conception in Taiwan’s construction industry. Journal of Civil Engineering and Management, 26(6): 534–550. https://doi.org/10.3846/jcem.2020.12639
Cheung, W.F., Lin, T.H. and Lin, Y.C. (2018). A real-time construction safety monitoring system for hazardous gas integrating wireless sensor network and building information modeling technologies. Sensors, 18(2): 1–24. https://doi.org/10.3390/s18020436
Dilakshan, S., Rathnasinghe, A. and Seneviratne, L.D.I.P. (2021). Potential of internet of things (IoT) in the construction industry. In Proceedings of the 9th World Construction Symposium on Reshaping Construction: Strategic, Structural and Cultural Transformations towards the Next Normal. Sri Lanka: Department of Building Economics, University of Moratuwa, 447–448. https://doi.org/10.31705/wcs.2021.39
Dosumu, O. and Aigbavboa, C. (2018). An assessment of the causes, cost effects and solutions to design-error-induced variations on selected building projects in Nigeria. Acta Structilia, 25(1): 40–70. https://doi.org/10.18820/24150487/as25i1.2
Dosumu, O. and Onukwube, H.N. (2013). Analysis of project success criteria in the Nigerian construction industry. International Journal of Sustainable Construction Engineering and Technology, 4(1): 31–47.
Ezechina, M.A., Okwara, K.K. and Ugboaja, C.A. (2015). The Internet of Things (IoT): A scalable approach to connecting everything. The International Journal of Engineering and Science, 4(1): 9–12.
Gamil, Y. and Alhagar, A. (2020). The impact of pandemic crisis on the survival of construction industry: A case of COVID-19. Mediterranean Journal of Social Sciences, 11(4): 122–128. https://doi.org/10.36941/mjss-2020-0047
Ghosh, A., Hosseini, M.R., Edwards, D., Kassem, M. and Matteo-Garcia, M. (2019). Use cases for Internet of Things (IoT) in the construction sector: Lessons from leading industries. Paper presented at the 36th International Conference of CIB W78. Newcastle-Upon-Tyne, UK, 18–20 September. Available at: http://hdl.handle.net/10536/DRO/DU:30128831 [Accessed on 15 April 2022].
Halim, M.I., Rusuli, M.S. and Yaziz, M.F. (2021). Attitudes, awareness, readiness and barriers towards the Internet of Things adoption among the construction industry in east coast Malaysia. Journal of Sustainable Management Studies, 2(1): 7–15.
Ibrahim, A.K.M., Rashid, R.A., Hamid, A.H., Sarijari, M.A. and Baharudin, M.A. (2021). Lightweight IoT middleware for rapid application development. Telkomnika, 17(3): 1385–1392. https://doi.org/10.12928/telkomnika.v17i3.11793
Inagbire, A. (2022). A unified architecture framework for integrating IoT into key national infrastructure to enhance the e-government ecosystem in Rwanda. MSc diss. University of Rwanda.
International Labor Organization (2018). Infrastructure Development, the Construction Sector and Employment in Rwanda. Available at: https://www.ilo.org/wcmsp5/groups/public/ed_emp/ifp_skills/documents/publication/wcms_723290.pdf [Accessed on 15 April 2022].
Kochovski, P. and Stankovski, V. (2018). Supporting smart construction with dependable edge computing infrastructures and applications. Automation in Construction, 85: 182–192.
Kumar, A. and Shoghli, O. (2018). A review of IoT applications in supply chain optimization of construction materials. In J. Teizer and M. König (eds.), Proceedings of the 35th International Symposium on Automation and Robotics in Construction (ISARC 2018). Berlin: International Association on Automation and Robotics in Construction, 487–494. https://doi.org/10.22260/isarc2018/0067
Le-Phuoc, D. and Hauswirth, M. (2009). Linked open data in sensor data mashups. In Proceedings of the 2nd International Conference on Semantic Sensor Network. Vol. 522. Washington DC: CEUR-WS.org, 1–16. Available at: https://ceur-ws.org/Vol-522/p3.pdf [Accessed on 15 April 2022].
Mahmud, S.H., Assan, L. and Islam, R. (2018). Potentials of Internet of Things (IoT) in Malaysian Construction Industry. Annals of Emerging Technologies in Computing, 2(4): 44–52. https://doi.org/10.33166/aetic.2018.04.004
Maru, R., Pitroda, J.R. and Raval, A.D. (2020). Feasibility study of Internet of Things (IoT) in construction industry: A review. Studies in Indian Place Names (UGC Care Journal), 40(50): 4948–4958.
Musfira, A.F. and Cassim, A.A. (2018). Analysis on internet of things, application, challenges and related future technologies (a literature review). Paper presented at the Interdisciplinary Scientific Research for Inclusive Development. South Eastern University of Sri Lanka, Sammanthurai, Sri Lanka, 15 November.
Osei, D.B, Ennin, I.B. and Aglobitse, P. (2017). Relationship between construction expenditure and economic growth in the sub-Saharan Africa. Ghanaian Journal of Economics, 5: 28–55.
Supriya, S., Charanya, R. and Madhumitha, S.J. (2020). A review on home automation system using IOT. In 2020 International Conference on Emerging Trends in Information Technology and Engineering (ic-ETITE). Vellore, India: Institute of Electrical and Electronics Engineers (IEEE), 1–11. https://doi.org/10.1109/ic-ETITE47903.2020.363
Takki, H. (2019). Utilization and adoption of Internet of Things in construction industry: Comparative case study in Finland and Sweden. Global Management of Innovation and Technology, 2(1): 1–102.
Tang, S., Shelden, D.R., Eastman, C.M., Pishdad-Bozorgi, P. and Gao, X. (2019). A review of building information modelling (BIM) and the Internet of Things (IoT) devices integration: Present status and future trends. Automation in Construction, 101: 127–139. https://doi.org/10.1016/j.autcon.2019.01.020
Viren, C. and Kazi, A. (2017). Application of the Internet of Things in civil engineering construction projects: A state of the art. Paper presented at the 4th International Conference on Computing for Sustainable Global Development. Delhi, 1–3 March.